Designed to combine the functions of two single rotor turnstiles into one turnstile. The intermeshing of the left and right-hand rotors allows reduction in overall width from 10 feet with 2 single rotor turnstiles to 8 feet with a space saving double gate, with no reduction of passage space. A 7 foot version is also available for extra small applications with only a minimal entry space reduction. Construction of all double gates matches single rotor turnstiles. Fully welded middle-barrier is included with all 3 rotor section turnstiles in order to prevent unauthorized entry through midsection of turnstile. Double gate can have up to 4 control points, two entry's and two exits. Each rotor can be supplied with electrical operation in one or two directions. Any combination of fail-lock or fail-safe is available.  Fail-lock is best suited for entry while virtually all controlled exits should be fail-safe to comply with local building codes. All fail-lock applications automatically include a mechanical key release to allow manual override in an emergency

Options: Time-out relay, Indicator lights, Rotation detection switch, 84" or 96" width, 3 or 4 rotor sections, Heel protectors.

Clear polycarbonate arms and laminated glass curved shield assembly provide aesthetic appeal while maintaining the functions of a dual rotor turnstile. Heavy-duty construction ensures durability and trouble-free operation. 1 1/4" x 3" arms provide clear, see-through effect while maintaining structural integrity and impenetrability. Available in 84" or 96" width. Standard construction is clear anodized aluminum. Other finishes include; color anodized aluminum, stainless steel, powder coated steel, bronze or brass. All 3 rotor section turnstiles include a clear middle barrier to prevent unauthorized entry through midsection of turnstile. Double gate can have up to 4 control points, two entry's and two exits.

Options: Time-out relay, Indicator lights, Rotation detection switch, 84" or 96" width, 3 or 4 rotor sections, Heel protectors.

The photo at right shows a ganged configuration. This type of installation can be used with any of our single rotor turnstiles. The curved shield assembly can be attached to the adjacent turnstile fixed barrier post, thereby providing stability and support. Since each turnstile is 60" in diameter, the overall width of the turnstile line would be a function of the 60" width multiplied by the number of units being used. Ganged turnstiles are particularly useful when the flow of traffic is consistent, i.e. one bank all entry or all exit. Both 3 and 4 rotor section turnstiles can be installed in a ganged assembly. 7' high full Security Handicap Swing Gates are a useful accompaniment to ganged turnstile installations, particularly in handicap accessible and package delivery areas.